Fujifilm Announces New 24.3MP X-H1 Mirrorless Camera with In-Body Image Stabilization
Fujifilm has finally done it. The company just introduced the new X-H1 mirrorless camera, which is Fujifilm’s first camera to feature in-body image stabilization (IBIS) that’s designed to help ensure sharper shots even when you’re using a non-image-stabilized lens.
The new Fujifilm X-H1 also has a 24.3MP APS-C X-Trans CMOS III sensor and X-Processor Pro image processing engine, and adds a new Flicker Reduction mode, which is designed to give you more consistent image exposure under florescent and mercury lighting. The Fujifilm X-H1 also shoots DCI 4K, aka “true 4K,” at 4096 x 2160 pixels for a cinema-level video.
Fuji’s new X-M1 mirrorless camera has a pro-grade body that’s dust, scratch, and water-resistant and built to shoot in temperatures as low as 14 degrees Fahrenheit. There’s also an optional, weather-resistant Vertical Power Booster Grip (VPB-XH1), shown with the camera in the image at the top of this story.
The real highlight though is the Fujifilm X-H1’s new 5-axis, 5.5-stop, in-body image stabilization system, which uses three axial accelerometers, three axial gyro sensors, and a special developed dual-processor to achieve 10,000 calculations per second.
Here’s a rundown of all the Fujifilm X-H1’s key features:
• 24.3MP X-Trans CMOS III Sensor with primary color filter and X-Processor Pro Processor
• 5-axis 5.5 stops in-body image stabilization
• 0.5-inch, approximately 3.69 million dots OLED Color Viewfinder
• Weather-resistant design; ability to operate in temperatures as low as 14°F/-10°C
• ISO Sensitivity:
- Standard output: AUTO1 / AUTO2 / AUTO3 (up to ISO12800) / ISO200~12800 (1/3 step)
- Extended output: ISO100/125/160/25600/51200
• LCD Monitor:
- 3-inch, aspect ratio 3:2, approx. 1.04 million dots touch screen color LCD monitor(approx. 100% coverage)
• Continuous Shooting
- 14 fps (with the Electronic Shutter), 8 fps (with the Mechanical Shutter)
- 11 fps (with the Mechanical Shutter and when fitted with VPB-XH1)
• Movie Recording (using a card with the UHS Speed Class 3 or higher)
- [4K (4096×2160)] 24P / 23.98P up to approx. 15min.
- [4K (3840×2160)] 29.97P / 25P / 24P / 23.98P up to approx. 15min.
- [Full HD (1920×1080)] 59.94P / 50P / 29.97P / 25P / 24P / 23.98P up to approx. 20min.
- [HD (1280×720)] 59.94P / 50P / 29.97P / 25P / 24P / 23.98P up to approx. 30min.
• Bluetooth Ver. 4.0 low energy technology
• New ETERNA film simulation mode
- Simulates cinematic film, understated colors and rich shadow tones
• New Flicker Reduction Mode
- Provides stable exposure during burst shots even under fluorescent and mercury lighting
• Advanced filters and Film Simulations, including ACROS
• Accessories included:
- Li-ion battery NP-W126S
- Battery charger BC-W126
- Shoe-mount flash unit EF-X8
- Shoulder strap, Body cap, Strap clip, Protective cover, Clip attaching tool, Hot shoe cover, Vertical Power Booster Grip
Availability and Pricing
The Fujifilm X-H1 will go on sale March 1, 2018 for $1,899 body only; $2,199 as a kit with the Vertical Power Booster Grip.
- Log in or register to post comments