DSLR Reviews

If you should choose to go back to normal shooting then simply take the filter out of its safe keeping place and, with the delta pointed true north, drop the filter back in, and give it a gentle push on the metal outer portion until you hear a slight "pop," which tells you it is back in place. At first this might seem a bit scary, but it is rather easy to do.

Be gentle as you work and do not force anything--it all goes in and out rather easily. And do avoid getting fingerprints on the filter part or anywhere in the interior of the camera.

Larger Print Results

Taken in a greenhouse in mid-winter, this shot was made with the Sigma SD14 and Marumi Red (R2) filter over the lens. ISO was set to 400, the upper limit as far as noise to my way of seeing..

Once you have done the conversion processing infrared shots allow for lots of creative play. This shot was made with the SD14 and Marumi HB700 filter over the lens with an exposure of f/8 at 1/60 sec. The image was brought into Photoshop CS3 for conversion to Grayscale, then Duotone and printed out to 13x19 on an Epson 3800 printer on Sihl Pro Photo Paper Silky.

Now that you're IR ready here are some other quick tips:
1) Use manual focus and Exposure mode. Depending on the filter you use to isolate the IR wavelengths the exposure will vary, but I found f/11 at 1/125 sec works for most shots. It's easy to review shots and then adjust exposure accordingly. The same goes for focus--eventually you'll learn the offset for IR, again depending on the filter you use.

2) Keep the ISO within reason. My best results were up to ISO 400. At a bit beyond 400 the noise gets pretty wicked in IR shots.

3) Do your conversions using raw format. The camera shoots JPEG or raw, not a combo file, so choose raw for the most conversion versatility.

4) Choose the filter according to the degree of effect desired. Sigma loaned us Marumi Red (R2), HB700, and HWB 830, with each bringing greater degrees of IR isolation to the table. If you want to see what you are shooting and work handheld use the red, as that works fine; if your process allows for tripod shooting and you can compose and then mount the filter use the others for a more profound effect.

5) Have fun, and go back and forth between the two with care and cleanliness in mind.